Difference between revisions of "Spectacles Dispensing Lenses Tab"

From Optisoft
Jump to navigation Jump to search
(Created page with " Back")
 
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
<<IMAGE HERE>>
Based on the patient’s prescription, the filter, material and type chosen, the Lenses tab will provide you with a selection of optically suitable lenses.
*Select the preferred lens. If you have chosen to dispense the eyes separately you will need to select the lens for each eye.
*Select any Tint and/or Coat options to be applied.
*Select any Lens Extras as required.
*If the selected lens requires an Edge Thickness is specified then the ET box will activate to allow you to type a value in.
The Glazing Charge will be filled in automatically based on the settings you have specified, see Glazing Charges
For information on setting up lenses, tints, coats and extras see the relevant section in Products






[[Using Dispensing|Back]]
[[Using Dispensing|Back]]

Latest revision as of 14:32, 29 May 2012

<<IMAGE HERE>>

Based on the patient’s prescription, the filter, material and type chosen, the Lenses tab will provide you with a selection of optically suitable lenses.

  • Select the preferred lens. If you have chosen to dispense the eyes separately you will need to select the lens for each eye.
  • Select any Tint and/or Coat options to be applied.
  • Select any Lens Extras as required.
  • If the selected lens requires an Edge Thickness is specified then the ET box will activate to allow you to type a value in.

The Glazing Charge will be filled in automatically based on the settings you have specified, see Glazing Charges

For information on setting up lenses, tints, coats and extras see the relevant section in Products


Back